• caesarxuchao
  • dchen1107 title: Nodes

  • TOC {:toc}

What is a node?

A node is a worker machine in Kubernetes, previously known as a minion. A node may be a VM or physical machine, depending on the cluster. Each node has the services necessary to run pods and is managed by the master components. The services on a node include Docker, kubelet and kube-proxy. See The Kubernetes Node section in the architecture design doc for more details.

Node Status

A node's status contains the following information:

Each section is described in detail below.

Addresses

The usage of these fields varies depending on your cloud provider or bare metal configuration.

  • HostName: The hostname as reported by the node's kernel. Can be overridden via the kubelet --hostname-override parameter.
  • ExternalIP: Typically the IP address of the node that is externally routable (available from outside the cluster).
  • InternalIP: Typically the IP address of the node that is routable only within the cluster.

Phase

Deprecated: node phase is no longer used.

Condition

The conditions field describes the status of all Running nodes.

Node Condition Description
OutOfDisk True if there is insufficient free space on the node for adding new pods, otherwise False
Ready True if the node is healthy and ready to accept pods, False if the node is not healthy and is not accepting pods, and Unknown if the node controller has not heard from the node in the last 40 seconds
MemoryPressure True if node has no memory pressure, otherwise False
DiskPressure True if node has no disk pressure, otherwise False

The node condition is represented as a JSON object. For example, the following response describes a healthy node.

"conditions": [
  {
    "kind": "Ready",
    "status": "True"
  }
]

If the Status of the Ready condition is "Unknown" or "False" for longer than the pod-eviction-timeout, an argument passed to the kube-controller-manager, all of the Pods on the node are scheduled for deletion by the Node Controller. The default eviction timeout duration is five minutes. In some cases when the node is unreachable, the apiserver is unable to communicate with the kubelet on it. The decision to delete the pods cannot be communicated to the kubelet until it re-establishes communication with the apiserver. In the meantime, the pods which are scheduled for deletion may continue to run on the partitioned node.

In versions of Kubernetes prior to 1.5, the node controller would force delete these unreachable pods from the apiserver. However, in 1.5 and higher, the node controller does not force delete pods until it is confirmed that they have stopped running in the cluster. One can see these pods which may be running on an unreachable node as being in the "Terminating" or "Unknown" states. In cases where Kubernetes cannot deduce from the underlying infrastructure if a node has permanently left a cluster, the cluster administrator may need to delete the node object by hand. Deleting the node object from Kubernetes causes all the Pod objects running on it to be deleted from the apiserver, freeing up their names.

Capacity

Describes the resources available on the node: CPU, memory and the maximum number of pods that can be scheduled onto the node.

Info

General information about the node, such as kernel version, Kubernetes version (kubelet and kube-proxy version), Docker version (if used), OS name. The information is gathered by Kubelet from the node.

Management

Unlike pods and services, a node is not inherently created by Kubernetes: it is created externally by cloud providers like Google Compute Engine, or exists in your pool of physical or virtual machines. What this means is that when Kubernetes creates a node, it is really just creating an object that represents the node. After creation, Kubernetes will check whether the node is valid or not. For example, if you try to create a node from the following content:

{
  "kind": "Node",
  "apiVersion": "v1",
  "metadata": {
    "name": "10.240.79.157",
    "labels": {
      "name": "my-first-k8s-node"
    }
  }
}

Kubernetes will create a node object internally (the representation), and validate the node by health checking based on the metadata.name field (we assume metadata.name can be resolved). If the node is valid, i.e. all necessary services are running, it is eligible to run a pod; otherwise, it will be ignored for any cluster activity until it becomes valid. Note that Kubernetes will keep the object for the invalid node unless it is explicitly deleted by the client, and it will keep checking to see if it becomes valid.

Currently, there are three components that interact with the Kubernetes node interface: node controller, kubelet, and kubectl.

Node Controller

The node controller is a Kubernetes master component which manages various aspects of nodes.

The node controller has multiple roles in a node's life. The first is assigning a CIDR block to the node when it is registered (if CIDR assignment is turned on).

The second is keeping the node controller's internal list of nodes up to date with the cloud provider's list of available machines. When running in a cloud environment, whenever a node is unhealthy the node controller asks the cloud provider if the VM for that node is still available. If not, the node controller deletes the node from its list of nodes.

The third is monitoring the nodes' health. The node controller is responsible for updating the NodeReady condition of NodeStatus to ConditionUnknown when a node becomes unreachable (i.e. the node controller stops receiving heartbeats for some reason, e.g. due to the node being down), and then later evicting all the pods from the node (using graceful termination) if the node continues to be unreachable. (The default timeouts are 40s to start reporting ConditionUnknown and 5m after that to start evicting pods.) The node controller checks the state of each node every --node-monitor-period seconds.

In Kubernetes 1.4, we updated the logic of the node controller to better handle cases when a big number of nodes have problems with reaching the master (e.g. because the master has networking problem). Starting with 1.4, the node controller will look at the state of all nodes in the cluster when making a decision about pod eviction.

In most cases, node controller limits the eviction rate to --node-eviction-rate (default 0.1) per second, meaning it won't evict pods from more than 1 node per 10 seconds.

The node eviction behavior changes when a node in a given availability zone becomes unhealthy. The node controller checks what percentage of nodes in the zone are unhealthy (NodeReady condition is ConditionUnknown or ConditionFalse) at the same time. If the fraction of unhealthy nodes is at least --unhealthy-zone-threshold (default 0.55) then the eviction rate is reduced: if the cluster is small (i.e. has less than or equal to --large-cluster-size-threshold nodes - default 50) then evictions are stopped, otherwise the eviction rate is reduced to --secondary-node-eviction-rate (default 0.01) per second. The reason these policies are implemented per availability zone is because one availability zone might become partitioned from the master while the others remain connected. If your cluster does not span multiple cloud provider availability zones, then there is only one availability zone (the whole cluster).

A key reason for spreading your nodes across availability zones is so that the workload can be shifted to healthy zones when one entire zone goes down. Therefore, if all nodes in a zone are unhealthy then node controller evicts at the normal rate --node-eviction-rate. The corner case is when all zones are completely unhealthy (i.e. there are no healthy nodes in the cluster). In such case, the node controller assumes that there's some problem with master connectivity and stops all evictions until some connectivity is restored.

Starting in Kubernetes 1.6, the NodeController is also responsible for evicting pods that are running on nodes with NoExecute taints, when the pods do not tolerate the taints. Additionally, as an alpha feature that is disabled by default, the NodeController is responsible for adding taints corresponding to node problems like node unreachable or not ready. See this documentation for details about NoExecute taints and the alpha feature.

Self-Registration of Nodes

When the kubelet flag --register-node is true (the default), the kubelet will attempt to register itself with the API server. This is the preferred pattern, used by most distros.

For self-registration, the kubelet is started with the following options:

  • --api-servers - Location of the apiservers.
  • --kubeconfig - Path to credentials to authenticate itself to the apiserver.
  • --cloud-provider - How to talk to a cloud provider to read metadata about itself.
  • --register-node - Automatically register with the API server.
  • --register-with-taints - Register the node with the given list of taints (comma seperated <key>=<value>:<effect>). No-op if register-node is false.
  • --node-ip IP address of the node.
  • --node-labels - Labels to add when registering the node in the cluster.
  • --node-status-update-frequency - Specifies how often kubelet posts node status to master.

Currently, any kubelet is authorized to create/modify any node resource, but in practice it only creates/modifies its own. (In the future, we plan to only allow a kubelet to modify its own node resource.)

Manual Node Administration

A cluster administrator can create and modify node objects.

If the administrator wishes to create node objects manually, set the kubelet flag --register-node=false.

The administrator can modify node resources (regardless of the setting of --register-node). Modifications include setting labels on the node and marking it unschedulable.

Labels on nodes can be used in conjunction with node selectors on pods to control scheduling, e.g. to constrain a pod to only be eligible to run on a subset of the nodes.

Marking a node as unschedulable will prevent new pods from being scheduled to that node, but will not affect any existing pods on the node. This is useful as a preparatory step before a node reboot, etc. For example, to mark a node unschedulable, run this command:

kubectl cordon $NODENAME

Note that pods which are created by a daemonSet controller bypass the Kubernetes scheduler, and do not respect the unschedulable attribute on a node. The assumption is that daemons belong on the machine even if it is being drained of applications in preparation for a reboot.

Node capacity

The capacity of the node (number of cpus and amount of memory) is part of the node object. Normally, nodes register themselves and report their capacity when creating the node object. If you are doing manual node administration, then you need to set node capacity when adding a node.

The Kubernetes scheduler ensures that there are enough resources for all the pods on a node. It checks that the sum of the limits of containers on the node is no greater than the node capacity. It includes all containers started by the kubelet, but not containers started directly by Docker nor processes not in containers.

If you want to explicitly reserve resources for non-pod processes, you can create a placeholder pod. Use the following template:

apiVersion: v1
kind: Pod
metadata:
  name: resource-reserver
spec:
  containers:
  - name: sleep-forever
    image: gcr.io/google_containers/pause:0.8.0
    resources:
      limits:
        cpu: 100m
        memory: 100Mi

Set the cpu and memory values to the amount of resources you want to reserve. Place the file in the manifest directory (--config=DIR flag of kubelet). Do this on each kubelet where you want to reserve resources.

API Object

Node is a top-level resource in the Kubernetes REST API. More details about the API object can be found at: Node API object.